Components · The Tru-Trac engineered range
Ten component families across the full belt system. Each one is specified against your belt — width, speed, load, material, duty cycle, environment, and the failure mode it has to prevent.
Featured · Tru-Trac Belt Tracker · Drag to rotate
- 10Component families
- 5Conveyor zones
- 80+Countries specified in
- 1994Engineering to one standard since
Start here
The ten families
- 01Carry-Side / Return-Side
Belt Trackers
Correct belt drift at the source. Mechanical, self-aligning, specified to the application.
Trough TrackersReturn Trackers - 02Discharge
Belt Cleaners & Ploughs
Cut carryback, protect pulleys, lower clean-up exposure.
Primary ScrapersSecondary ScrapersAngle / V-Ploughs - 03Load & Transfer
Load Zone Impact Control
Absorb load-zone impact, reduce belt sag, stabilise transfer.
Impact Beds & CradlesImpact Idlers - 04Load & Transfer
Dust Control & Skirting
Contain spillage and dust at transfer points.
Skirting & SealingDust Containment - 05Carry-Side
Idlers, Rollers & Frames
Carry, return, and impact idler sets with duty-matched frame geometry.
Idlers & RollersFrames & Garlands - 06Monitoring
Belt Scales & Monitoring
Confidence in measured production — plus condition monitoring and metal detection.
Belt ScalesCondition Monitoring (incl. metal detection) - 07Monitoring
Rip Prevent+
Detect and stop belt rips before damage extends. Engineered to belt type and operating envelope.
Single product family - 08across the belt run
Conveyor Safety
Isolation, access, and operator protection along the conveyor.
GuardingSafety Switches & Devices - 09Discharge / Return-Side
Belting, Pulleys & Lagging
Belt, pulleys, lagging, and tensioning — specified to duty, not catalogue.
BeltingPulleysLagging (incl. take-up & tensioning) - 10Return-Side
Belt Repair, Splicing & Bonding
Planned and emergency belt repair.
Repair MaterialsSplicingBonding (incl. chemicals)
Selection tools
Match the component to the belt in a few clicks.
If you know your operating conditions, the selector walks you to the right configuration for your duty.
More selectors added as they go live.
The same family can need different configuration, mounting, material, lagging, or tensioning depending on the conveyor. We specify to the duty in front of us — and prove it in service.
Measured outcome
−62% unplanned stoppages on a high-tonnage copper tripper conveyor after a tracking redesign.
Zambia · copper
See the measured outcomes
Tell us the belt width, speed, material, loading condition, failure mode, and environment. We'll identify the right family and specification path.
One business day on inbound enquiries · 80+ countries · 6 continents